Tel : +82-(0)51-971-8846 / Fax : +82-(0)51-971-6760
Copyright (c) ComeSys Ltd, All Right Reserved.
Input voltage: 5/8/12Vdc as requested
Output: Analogue (Single, Dual), PWM (Single, Dual)
Switch: Single, Double ( Electronic or Mechanical )
Connector: Sumitomo HM Series
Option: AMP J-Series or Delphi or Deutsch or Free wire leads
Rotating magnetic/ fixed sensor configuration provides improved accuracy and reliability.
Fully programmable outputs: offset, gain, slope and temperature conversation
Sintered magnetic provides excellent temperature stability and corrosion resistance.
Internal preload return spring
Seal Integrity: IP67
ESD: Tested in accordance with IEC 61000-4-2
EMS: As per ISO 11452-2 (2004E)
Input Voltage : 5 / 8 / 12Vdc as requested
Signal and Switches: Signal type and switch position to be in accordance with customer specification.
Sensor Mechanical Travel: 120deg +/- 5deg
Sensor Electrical Travel: 110deg +/- 3deg
Rotor rotating Force: max 3kgf*㎝
Adjustable as per customer specification.
End-Break: min 20kgf*㎝
M6 Flange Nut Locking Torque: 0.6~0.8kgf*m
Sensor return to idle after soaking at:
–40℃ for 12Hours : below 0.5sec
+50℃ for 12Hours : below 0.5sec
Operation Temp.: -40 ~ +85
Insulation Resistance: DC500V 100MΩ
Vibration: Subject to broadband random vibration between 50 and 250Hz for 12 hrs in all 3 axis(30G).
High Temp. Storage: 120℃ 48Hr
Low Temp. Storage: -40℃ 48Hr
Salt fog: KS C 0223 96Hr
Oil Test: Drop in Diesel Oil (72Hr)
Water Test: KS C 0284 RC (except Connector Parts)
Impact: Free drop onto a smooth concrete floor from a height of one meter, a total of 1 times.
Life: - 2.5 M Cycle at Full Travel