Tel : +82-(0)51-971-8846 / Fax : +82-(0)51-971-6760
Copyright (c) ComeSys Ltd, All Right Reserved.
Input voltage: 5/8/12/24/48/72Vdc as requested
Output: Analogue ( Single, Dual ) PWM ( Single , Dual ), CAN Bus as per SAE J-1939
Switch: Single, Double(Electronic Switch)
Connector: Adjustable as per customer specification.
Option: AMP J-Series. Delphi, Deutsch, Packard weather-seal or as requested.
Rotating magnetic/ fixed sensor configuration provides improved accuracy and reliability.
Fully programmable outputs : offset, gain, slope and temperature conversation
Sintered magnetic provides excellent temperature stability and corrosion resistance.
Internal preload return spring & Internal magnetic screening plate
Seal Integrity: IP67
ESD: Tested in accordance with IEC 61000-4-2
EMS: As per ISO 11452-2
Input Voltage : 5 / 8 / 12 / 24 / 48 /72Vdc as requested
Signal and Switches: Signal type and switch position to be in accordance with customer specification.
Sensor Mechanical Travel: 156deg, 185deg
Rotor rotating Force: Min 0.4kgf / Max 1.3kgf
Adjustable as per customer specification.
End-Break: min 5Nm
Sensor return to idle after soaking at
–40℃ for 12Hours : below 0.5sec
+50℃ for 12Hours : below 0.5sec
Operation Temp.: -40 ~ +85
Storage Temp.: -40 ~ +105
Vibration Test: Subject to broadband random vibration between 20 and 2000Hz for hours in all 3 axis.
Shock Test: After exposed to Acceleration 20G for 11ms
Impact : Free drop onto a smooth concrete floor from a height of on meter, a total of 6 times.
High Voltage Test
APS signal : After Exposed to 12Volts for 3min
IVS signal : After Exposed to 38Volts for 3min
Temp Test : After Exposed to - 40 ℃ ~ +85 ℃ (100cycles)
Humidity Test : After Exposed to – 32 ℃ ~ +70 ℃ (96%)
Salt Fog : After exposed to salt for 96hours (JIS Z2371)
Chemical Test : Exposed to 3 second dipping in each of the test fluids, followed by a 3 minutes air dry
Life: - 10 M Cycle at Full Travel